Nest Thermostat Troubles: The Problems with IoT and Smart Devices Exemplified
Last fall, I installed a Nest thermostat, which I loved at first. I now hate it. Here’s why — and what the Nest’s problems say about challenges in the world of smart things and the IoT writ large.
When I purchased and installed the Nest, I loved it above all because it was very easy to set up. In particular, I liked that the Nest can run without a wired power source.
This was a big deal because my furnace was installed in 1949 and lacks a “common” wire to supply power to the thermostat. While I consider myself a pretty capable DIYer (my wife might disagree), the furnace is controlled by a conglomeration of brittle, unlabeled, cloth-insulated, randomly colored wires in the dark recesses of my basement. Figuring out how to connect a common wire to this mess and fish it upstairs would probably have taken me days, and involved a lot of low-voltage shocks.
The Nest thermostat’s ability to run in most cases without a common wire is therefore a really beneficial feature. I was very happy that I was able to install the Nest in about ten minutes using only the 68-year-old furnace wiring that was already inside the wall.
I also like that the Nest looks pretty snazzy, that it records my energy usage history and, of course, that I can control it from anywhere using my phone or computer (when it’s connected to the Internet, at least).
The Nest’s Dark Side
Yet over my first year as a Nest owner, I’ve grown increasingly less enthralled with the device. My major gripes include:
- The interface is confusing. Instead of showing me what the temperature actually is in my house, the main Nest interface usually displays the target temperature that it is trying to maintain. So, if I set the temperature to 68 degrees but it is currently only 65 degrees, the thermostat displays a big 68. This is kind of like if, when I logged into my bank’s app, it displayed the amount of money I wish I had, rather than the actual balance in my account. It’s much more useful to know what the temperature really is at a given moment, not what it should eventually become. I can get this information if I log into the Nest app, or click on the device itself, but then I have to perform additional, manual steps to get crucial information. I think this is just poor interface design.
- Connectivity monitoring is difficult. I’d like to get an email when the Nest disconnects from my wireless network. This could be a sign that the power to my house has gone off — which, in winter, would mean I need to drain the pipes in order to prevent serious damage. Bizarrely, there appears to be no way to configure disconnect notifications from the Nest. The thing seems to be designed under the flawed assumption that it will always have power and Internet connectivity.
- It tries to be smart but uses dumb data. The Nest is marketed as a “learning” thermostat because it supposedly learns your schedule and, using predictive analytics, automatically programs heating and cooling schedules to ensure that your house reaches your desired temperature when you are home, but that energy is not wasted on heating or cooling when no one is home to enjoy it. This feature is great in theory. In practice I find that it works poorly because the analytics are based on problematic data. For example, the Nest tries to determine which times of day I am home in part by monitoring how often I walk by the thermostat. The thermostat is in my dining room, and I don’t usually go into the dining room apart from when I am, you know, dining. As a result, the Nest seems to think I am home only at meal times. It should either have a better way of collecting data about my habits, or not use this information for predictive analytics because it is flawed data.
- It requires manual maintenance. Occasionally, for reasons I don’t fully understand, my Nest goes offline and displays a blinking green light. This may be because of a loss of power, a failed update or something else. I’m not sure. Whatever the reason, I have to reset the device manually. That’s fine if I am home and notice the problem before the temperature in my house goes out of whack. It would not be so fine if it were the middle of winter, the furnace shut off and I arrived home to discover burst pipes and cracked radiators, all because the Nest broke and could not automatically recover.
The Nest as an Example of the IoT’s Problems
These issues highlight problems that affect not just the Nest, but “smart” devices on the Internet of Things (IoT) in general, including:
(list on next page)