The Nest smart learning thermostat's connectivity, management and data analytics problems exemplify big challenges for IoT and smart device growth.

Christopher Tozzi, Contributing Editor

December 8, 2017

6 Min Read
Internet of Things
Verizon (VZ) has taken additional steps to expand its Internet of Things (IoT) portfolio.

Last fall, I installed a Nest thermostat, which I loved at first. I now hate it. Here’s why — and what the Nest’s problems say about challenges in the world of smart things and the IoT writ large.

When I purchased and installed the Nest, I loved it above all because it was very easy to set up. In particular, I liked that the Nest can run without a wired power source.

This was a big deal because my furnace was installed in 1949 and lacks a “common” wire to supply power to the thermostat. While I consider myself a pretty capable DIYer (my wife might disagree), the furnace is controlled by a conglomeration of brittle, unlabeled, cloth-insulated, randomly colored wires in the dark recesses of my basement. Figuring out how to connect a common wire to this mess and fish it upstairs would probably have taken me days, and involved a lot of low-voltage shocks.

The Nest thermostat’s ability to run in most cases without a common wire is therefore a really beneficial feature. I was very happy that I was able to install the Nest in about ten minutes using only the 68-year-old furnace wiring that was already inside the wall.

I also like that the Nest looks pretty snazzy, that it records my energy usage history and, of course, that I can control it from anywhere using my phone or computer (when it’s connected to the Internet, at least).

The Nest’s Dark Side

Yet over my first year as a Nest owner, I’ve grown increasingly less enthralled with the device. My major gripes include:

  • The interface is confusing. Instead of showing me what the temperature actually is in my house, the main Nest interface usually displays the target temperature that it is trying to maintain. So, if I set the temperature to 68 degrees but it is currently only 65 degrees, the thermostat displays a big 68. This is kind of like if, when I logged into my bank’s app, it displayed the amount of money I wish I had, rather than the actual balance in my account. It’s much more useful to know what the temperature really is at a given moment, not what it should eventually become. I can get this information if I log into the Nest app, or click on the device itself, but then I have to perform additional, manual steps to get crucial information. I think this is just poor interface design.

  • Connectivity monitoring is difficult. I’d like to get an email when the Nest disconnects from my wireless network. This could be a sign that the power to my house has gone off — which, in winter, would mean I need to drain the pipes in order to prevent serious damage. Bizarrely, there appears to be no way to configure disconnect notifications from the Nest. The thing seems to be designed under the flawed assumption that it will always have power and Internet connectivity.

  • It tries to be smart but uses dumb data. The Nest is marketed as a “learning” thermostat because it supposedly learns your schedule and, using predictive analytics, automatically programs heating and cooling schedules to ensure that your house reaches your desired temperature when you are home, but that energy is not wasted on heating or cooling when no one is home to enjoy it. This feature is great in theory. In practice I find that it works poorly because the analytics are based on problematic data. For example, the Nest tries to determine which times of day I am home in part by monitoring how often I walk by the thermostat. The thermostat is in my dining room, and I don’t usually go into the dining room apart from when I am, you know, dining. As a result, the Nest seems to think I am home only at meal times. It should either have a better way of collecting data about my habits, or not use this information for predictive analytics because it is flawed data.

  • It requires manual maintenance. Occasionally, for reasons I don’t fully understand, my Nest goes offline and displays a blinking green light. This may be because of a loss of power, a failed update or something else. I’m not sure. Whatever the reason, I have to reset the device manually. That’s fine if I am home and notice the problem before the temperature in my house goes out of whack. It would not be so fine if it were the middle of winter, the furnace shut off and I arrived home to discover burst pipes and cracked radiators, all because the Nest broke and could not automatically recover.

The Nest as an Example of the IoT’s Problems

These issues highlight problems that affect not just the Nest, but “smart” devices on the Internet of Things (IoT) in general, including:

(list on next page)

  • Difficult interfaces. Most IoT devices have non-traditional interfaces. They can’t display as much information by default as you can on a traditional computer screen. Developers and designers must therefore think hard about which information to make available by default to administrators and users. This is especially important in cases where IoT networks are composed of hundreds or thousands of devices and collecting extra data manually (as I do on my Nest by logging into the app to see what the actual room temperature is) is not feasible.

  • Lack of constant power and connectivity. In a perfect world, IoT devices would always have power and would always be connected. But in many real-world contexts this is difficult to achieve. Devices should be designed accordingly. There are solutions like the LoRaWAN, but they are not necessarily used. My Nest would be more reliable if it connected using a non-traditional network designend specifically for the IoT, rather than relying on my local wireless network.

  • Poor data-based analytics. The ability to leverage data to automate the behavior of IoT devices is one of the most compelling features of the IoT. To work properly, however, analytics-driven management of IoT hardware needs to be based on useful data. Collecting data that provides only part of the picture you need to construct, and ending up with unhelpful results, is worse than not using predictive analytics at all.

  • Automated management. More so than traditional computers and servers, IoT devices need to be managed in a fully automated way. When you are dealing with hundreds or thousands of devices, or don’t always have humans beings in close proximity to your devices, you can’t rely on manual processes for managing them or fixing them when something breaks. This is especially true in cases where the devices manage critical infrastructure. Without full automation, the IoT won’t work well at all.

We’re getting closer to a world where smart devices connected by the IoT can truly make life easier. For the moment, however, shortcomings like those described above make IoT applications less reliable than they need to be in order to deliver real benefits.

I sometimes consider reinstalling the ancient mercury-filled thermostat that my Nest replaced. It was dumb as a thermostat can be, but it just worked.

Read more about:

AgentsMSPsVARs/SIs

About the Author(s)

Christopher Tozzi

Contributing Editor

Christopher Tozzi started covering the channel for The VAR Guy on a freelance basis in 2008, with an emphasis on open source, Linux, virtualization, SDN, containers, data storage and related topics. He also teaches history at a major university in Washington, D.C. He occasionally combines these interests by writing about the history of software. His book on this topic, “For Fun and Profit: A History of the Free and Open Source Software Revolution,” is forthcoming with MIT Press.

Free Newsletters for the Channel
Register for Your Free Newsletter Now

You May Also Like